Precast Products

Building Beams

Widths up to 4’. Depths vary based on needs of structure. Rectangular, single ledge, & double ledge (inverted tee) beams available. Up in form finishes: rake (prep for composite field topping) or float. Down in form finishes: as cast (commercial grade), grade B, grade A, or sacked & rubbed (USDA).


Columns

Wide range of width available. Up in form finishes: wet trowel (commercial grade); hard trowel (grade A); or sacked & rubbed (USDA); sandblast; stain. Down in form finishes: as cast (commercial grade), grade B, grade A, or sacked & rubbed (USDA).


Double Tees

Primary widths of 8’ & 12’ (narrower widths available as necessary). Varied flange (between 2” and 6”) and stem depths (up to 36”deep) available. Up in form finishes: rake (prep for composite field topping); screed; & broom. Down in form finishes: as cast (commercial grade), grade B, grade A, or sacked & rubbed (USDA). FEMA […]


Wall Panels

Varied widths (up to 12’) and thicknesses (up to 12”); additional widths & thicknesses available on exception basis. Solid or insulated with r-values up to R21. Up in form finishes: wet trowel (commercial grade); hard trowel (grade A); sacked & rubbed (USDA); vee-grove; raked; corewall. Down in form finishes: form finish (grade A); sacked & […]


 

Contact Us

Main Office

220 SE 6th Street, Suite 310
Des Moines, IA 50309
Phone: 515.243.5118 | Fax: 515.243.5502

Production Plant

3312 E Granger
Des Moines, IA 50317

PDM - Metals

110 E School Street
Carlisle, IA 50047
515.421.4152

Employment Inquiries

Human Resources
Phone : 515.243.5118
pdmhr@pdmprecast.com