Building Beams

  • Widths up to 4’.
  • Depths vary based on needs of structure.
  • Rectangular, single ledge, & double ledge (inverted tee) beams available.
  • Up in form finishes: rake (prep for composite field topping) or float.
  • Down in form finishes: as cast (commercial grade), grade B, grade A, or sacked & rubbed (USDA).

Columns

  • Wide range of width available.
  • Up in form finishes: wet trowel (commercial grade); hard trowel (grade A); or sacked & rubbed (USDA); sandblast; stain.
  • Down in form finishes: as cast (commercial grade), grade B, grade A, or sacked & rubbed (USDA).

Double Tees

  • Primary widths of 8’ & 12’ (narrower widths available as necessary).
  • Varied flange (between 2” and 6”) and stem depths (up to 36”deep) available.
  • Up in form finishes: rake (prep for composite field topping); screed; & broom.
  • Down in form finishes: as cast (commercial grade), grade B, grade A, or sacked & rubbed (USDA).
  • FEMA ratings available.

Wall Panels

  • Varied widths (up to 12’) and thicknesses (up to 12”); additional widths & thicknesses available on exception basis.
  • Solid or insulated with r-values up to R21.
  • Up in form finishes: wet trowel (commercial grade); hard trowel (grade A); sacked & rubbed (USDA); vee-grove; raked; corewall.
  • Down in form finishes: form finish (grade A); sacked & rubbed (USDA); reveals; form liner; thin brick; sandblast; stained.
  • Load bearing or non-load bearing.
  • Composite or non-composite.
  • FEMA ratings available.